Accessories

SOLAR BATTERY CHARGER

FEATURES

We offer a 2 watt solar charger to help maintain your battery for dump trailers and tilt trailers. These work well in conjunction with our integrated battery charger. The panel is protected by a clear polyurethane coating that makes them extremely durable and weather proof. This panel has a 5 year limited warranty.

CARGO TIE DOWN LOOPS

Our utility trailers come with stake pockets standard but some users prefer to use tie-down loops that sit above the deck. These are great for strapping four wheelers, UTVs, motorcycles, mowers, and other cargo. The cargo tie-down loops are sold in pairs, with two pair (4 loops) being the most common.

• Rated at 1000 lbs capacity
• Loops angled at 45 degrees
• Loops mounted on top of the outside frame
• Standard on expanded metal and solid sides
• Option code: -TD01 (2 loops), -TD02 (4 loops), -TD03 (6 loops), etc.

BOLT ON CHAIN RACK

FEATURES

• Rack stores up to 5 chains
• Bolts to c-channel behind risers and front gussets on PJ gooseneck trailers
• Can be locked to help prevent theft
• Can be mounted to driver or passenger side (two racks recommended for chains & boomers)
• Fit FS, FD, LD, FY, LY, & SD models

BOLT ON LIGHT BAR

FEATURES

Do you want to load and unload your trailer at night? Check out our easy to install bolt-on light bar. This light bar features four (4) round utility lights that give you ample lighting and installs in around 30 minutes

PRE-WIRED & READY TO BOLT-ON - LIGHTS ARE INCLUDED

• Fits on the channel cross-members between the risers on any PJ Gooseneck
• Includes four (4) round utility lights in a shock proof rubber housing
• Lights can be adjusted vertically and horizontally
• 1 1/2" mandrel bent round tube protective bar, lower frame built from 3/16" powder coated steel
• Pre-wired with generous 9ft of wiring for simple two-wire installation (includes automotive inline fuse)
• Toggle switch is mounted to light bar, for easy access from the trailer deck or ground
• Lights are wired to junction box and powered by tow vehicle
• Lights are connected with heat shrink butt connectors for protection and reliability (see photos)
• Wiring for each light is protected by angle conduit (see photos)
• Includes zinc plated hardware (nuts, washers, & bolts) and instructions for installation
• Tools required for installation: Cordless Drill, 3/8" Drill Bit, 1/2" Wrench, Screwdriver, and Pliers
• Light bar dimensions: 42" wide x 12.5" tall x 4" deep - Weight: 26 lbs
• If ordered with a top riser toolbox the light bar must be mounted forward on the neck on top of the I-beam

AVAILABLE COLORS

• Black: PJ Part: 170126
• Red: PJ Part: 170129
• Grey: PJ Part: 170130
• White: PJ Part: 170131
• Yellow: PJ Part: 170132

STAKE POCKET SPARE TIRE MOUNT (REMOVABLE)

FEATURES

Want to add a Spare Tire Mount to your PJ Trailer but don't want to weld it to the frame? Our stake pocket spare tire mount bolts on in less than a minute. If you like this accessory you might also like our Stake Pocket D-rings.

• Fits PJ 5 on 5, 6 on 5.5, and 8 on 6.5 bolt patterns
• Takes less than a minute to install
• Made from 1/4" smooth plate and 2" x 2" rectangular tubing
• Black Powder Coat Finish
• Drive-in studs must be added depending on wheel size (Available at PJ Dealers or through PJ Parts.)
• Fit most PJ Trailers with 5", 6", or 8" outside frame (channel or tube)
• Not for use on dump trailer stake pockets
• Fits the rear stake pocket on PJ utility trailers but doesn't fit the front due to interference with the tongue.
• PJ Part Number: 160438

STAKE POCKET D-RINGS (ADJUSTABLE)

STAKE POCKET D-RINGS

Ever wish you could move your d-rings to different positions around your trailer depending what you were hauling? If so, our stake pocket d-rings make a great addition to any PJ Trailer with our 3 3/4" inside diameter stake pockets. You can simply slide the channel inside the stake pocket and insert the hitch pin.

• Fits PJ 3 3/4" ID Stake Pockets
• D-ring rated at 11,780 lbs
• Can be moved in seconds with no tools
• Black Powder Coat Finish
• Includes hitch pin
• Not for use on dump trailer stake pockets
• Stake Pocket D-rings do not fit most C4 Carhauler or Utility Trailers (Use Utility D-ring instead)
• PJ Part Number: 180080

UTILTY STAKE POCKET D-RING

We have developed a utility trailer version of our extremely popular stake pocket d-rings. This version uses a lighter d-ring and has a notch cut to clear the wrap tongue on a PJ utility trailer and 4" Channel Carhauler.

• Fits PJ utility trailers and 4" Channel Carhauler
• Channel is notched to clear trailer tongue
• D-ring rated at 2,000 lbs
• Can be moved in seconds with no tools
• Black Powder Coat Finish
• Includes hitch pin
• PJ Part Number: 180078

PRODUCT FEATURES

FEATURES

Our Bargman cold weather wiring harness keeps your trailer plug flexible and functional in the most extreme weather conditions.

• 7-way Bargman Plug with Dual Contacts
• Operating temperature range -67°F to 221°F (-55°C to 105°C)
• Available in 7 ft bumperpull and 10 ft gooseneck lengths
• Easy to add to any PJ Trailer with a junction box
• Part Numbers: 7 ft - 170293 & 10 ft - 170292

STAINLESS STEEL WHEEL SIMULATORS

FEATURES

One of the easiest ways to dress up your gooseneck trailer is by adding stainless steel wheel simulators (sometimes called chrome trailer wheel simulators). These simulators give you that high-end stainless steel look, without all the cost.

• Stainless Steel Wheel Simulators with Over Lug Mounting
• Made From Mirror Polished Stainless Steel
• Fit Trailers with 16" 8 Lug Dual Disc Wheels
• Easy Installation & Center Cap Removal
• Simulators Do Not Interfere With Lug Nut Torque
• Lifetime Limited Warranty
• DOT Legal
• Sold in sets of 4
• PJ Part: chrome trailer wheel simulators